供应everslik1201涂层

MATERIAL SAFETY DATA SHEET 
EVERSLIK 1201 CLEAR
PRODUCT NAME: EVERSLIK 1201 CLEAR                           HMIS CODES   H F R P
PRODUCT CODE: PEK1201CLR                                                 2*3 0 G
1. MANUFACTURING IDENTIFICATION
EVERLUBE PRODUCTS
100 COOPER CIRCLE
PEACHTREE CITY, GA  30269
EMERGENCY PHONE: CHEMTREC - 800-424-9300
DATE PREPARED: 7/9/2010
INFORMATION PHONE: (770) 261-4800
NAME OF PREPARER: CHEMICAL COMMUNICATIONS COOORDINATOR
2. HAZARDOUS INGREDIENTS
 COMPONENT/EXPOSURE LIMITS                             CAS#         % BY WT.
 ------------------------------------------------------------------------------
 METHYL ISOBUTYL KETONE                                108-10-1     10% - 15%
     OSHA PEL: 100.000 PPM-TWA
     OSHA VPEL 50.000 PPM-TWA
     OSHA VPEL 75.000 PPM-STEL
     ACGIH TLV 50.000 PPM-TWA
     ACGIH TLV 75.000 PPM-STEL
     LD50 ORAL RAT: 2080 MG/KG
     LD50 INHALATION RAT: >2000 PPM, 4 HR
     LD50 DERMAL RABBIT: >3.0 G/KG
 TOLUENE                                               108-88-3     10% - 15%
     OSHA PEL 200.00 PPM-TWA
     OSHA PEL 300.000 PPM-CEILING
     OSHA VPEL 100.000 PPM-TWA
     OSHA VPEL 150.000 PPM-STEL (SKIN)
     ACGIH TLV 50.000 PPM-TWA (SKIN)
     ACGIH TLV 150.000 PPM-STEL (SKIN)
 XYLENE                                                1330-20-7    10% - 15%
     ACGIH TLV: 100 PPM
     OSHA PEL: 100 PPM
     ACGIH STEL: 150 PPM
     LD50/LC50:
     LD50:>2000mg/kr (rat)
     LD50: >2000 mg/kr (rabbit)
     LD50: >5000 ppm/1 hour (rat)
 ETHANOL                                               64-17-5      5% - 10%
     OSHA PEL 1000.000 ppm - TWA
     OSHA VPEL 1000.000 ppm - TWA
     ACGIH TLV 1000.000 ppm - TWA
     LD50 ORAL-7060 mg/kg (rat)
     LC 50 INHALATION-20000 ppm  10 hr (rat)
 N-METHYL-2-PYRROLIDONE                                872-50-4     5% - 10%
     ACGIH TLV: NONE ESTABLISHED
     OSHA PEL: NONE ESTABLSIHED
     OSHA STEL: NONE ESTABLISHED
     LD50 ORAL->5000 mg/kg (rat)
     LD50 DERMAL: >400 mg/kg - 4 hr (rabbit)
     LD50 INHALATION: >5600 mg/m3 (rat)
 N-BUTANOL                                             71-36-3      0% - 5%
?
MATERIAL SAFETY DATA SHEET Page 2 of 7
EVERSLIK 1201 CLEAR
     OSHA PEL 100.000 PPM - TWA
     OSHA VPEL 50.000 PPM - CEILING (SKIN)
     ACGIH TLV 20.000 PPM - TWA
     LD50 ORGAL 0.790 g/kg (rab)
     LD50 DERMAL 3.4 g/kg (Rabbit)
     LC50 INHALATIN 8000ppm (24.24 mg/L) (rat)
 ISOPROPANOL                                           67-63-0      0% - 5%
     OSHA PEL 400.000 ppm-TWA
     OSHA VPEL 400.000 ppm-TWA
     OSHA VPEL 500.000 ppm-STEL
     ACGIH TLV 200.000 ppm-TWA
     ACHIH TLV 400.000 ppm-STEL
     LD50 ORAL - 5840 mg/kg (rat)
     LD50 DERMAL-13000 mg/kg (rabbit)
3. HAZARDS IDENTIFICATION
   POTENTIAL EFFECTS OF SHORT-TERM (ACUTE) EXPOSURE:
   Processing fumes may cause irritation of the eyes and respiratory
   tract. Use with adequate ventilation. Avoid breathing process
   fumes.
   EYE CONTACT:
   This material can cause eye irritation.
   SKIN CONTACT:
   Prolonged and repeated contact with the skin can cause defatting and
   drying of the skin resulting in skin irritation and skin rash
   (dermatitis).
   INHALATION:
   Inhalation of high concentrations of solvents may cause narcotic
   effects such as headaches, dizziness, nausea, vomiting and coma.
   INGESTION:
   May cause adverse health effects and can cause gastro-intestinal
   irritation.
   POTENTIAL EFFECTS OF LONG-TERM (CHRONIC) EXPOSURE:
   No specific information is available regarding long-term exposure to
   this material. Other information on any known toxic or chronic-
   health effects of the material or its ingredients can be found in
   Section 11 - Toxicological Information.
4. FIRST AID MEASURES
   EYE CONTACT:
   With eyelids open, immediately flush eyes with lots of lukewarm water
   for at least 30 minutes. Get immediate Medical Assistance.
   SKIN CONTACT:
   Wash the skin thoroughly with plenty of water for at least 15 minutes,
   using a mild and non-abrasive soap. Cold water may be used
   Consult a doctor if irritation persists.
   INHALATION:
   Evacuate to fresh air and administer artificial respiration if
?
MATERIAL SAFETY DATA SHEET 
EVERSLIK 1201 CLEAR
   breathing stopped. Obtain Medical Aid.
   INGESTION:
   Never give anything by mouth if the victim is semi-conscious,
   unconscious or convulsing.
   Seek immediate medical attention.
   Induce vomiting immediately by giving 2 glasses of water and
   stimulating the uvula with a finger.
   NOTE TO PHYSICIANS:
   The main hazard following accidental ingestion is aspiration of the
   liquid into the lungs producing chemical pneumonitis. If more
   then 2.0 ml/Kg has been ingested, vomiting should be induced with
   supervision. If symptons, such as loss of gag reflex, convulsions
   or unconsciousness occur before vomiting, gastric lavage with a
   cuffed endotracheal tube should be considered.
5. FIRE FIGHTING MEASURES
   FLAMMABLE PROPERTIES:
   Vapors may form, with air, an explosive mixture between lower and upper
   explosive limits.
   FLASH POINT (DEGREES F.) ..............: 45 F
   FLASH POINT METHOD ....................: TCC
   LOWER FLAMMABILITY LIMIT (% BY VOLUME).: 1.2
   UPPER FLAMMABILITY LIMIT (% BY VOLUME).: 36.0
   AUTO-IGNITION TEMPERATURE..............: n/a
   HAZARDOUS DECOMPOSITON PRODUCTS:
   Irritating and/or toxic fumes including the following may be released:
   Carbon, Silicon, Phosphorus oxides, or their compounds
   UNUSUAL FIRE AND EXPLOSION HAZARDS:
   Avoid accumulation of water. Product will float on water and may
   reignite on surface of water.
   Closed containers may explode due to pressure build-up when
   exposed to extreme heat.
   DO NOT cut, drill, grind or weld near containers even when empty.
   Residual product or vapours may ignite or explode.
   Extinguish all nearby sources of ignition.
   EXTINGUISHING MEDIA:
   CO2, foam, dry chemical or halon
   FIREFIGHTING PROCEDURES / EQUIPMENT:
   Extinguish all nearby sources of ignition.
   Use water spray to cool containers and structures exposed to
   fire.
   Fire-Fighters should wear self-contained breathing apparatus and
   full protective equipment.
?
MATERIAL SAFETY DATA SHEET 
EVERSLIK 1201 CLEAR
6. ACCIDENTAL RELEASE MEASURES
   PERSONAL PRECAUTIONS:
   Emergency personnel must wear the following protective equipement:
   selfcontained breathing apparatus, protective clothing, safety
   goggles and boots.
   Evacuate all personnel not related to emergency procedures.
   ENVIRONMENTAL PRECAUTIONS:
   Prevent the product or the wash waters from entering the water system
   or *ers.
   US regulations require reporting spills of this material that
   could reach any surface waters. In Canada, report to the
   applicable provincial environment ministry.
   SPILL RESPONSE / CLEANUP:
   SMALL SPILL:
   Eliminate all sources of ignition, provide ventilation, contain spill
   and absorb with inert absorbent.
   Issue warning "Flammable". Isolate the hazard area and restrict
   access.
   Handle as highly flammable liquid.
   Wear appropriate breathing apparatus (if applicable) and
   protective clothing.
   Prevent the spill or wash from entering *ers or watercourses.
   LARGE SPILL:
   Remove by mechanical means and place in containers.
7. HANDLING AND STORAGE
   SAFE HANDLING PROCEDURES:
   Maintain good personal hygiene. Avoid breathing processing vapours.
   Avoid prolonged or repeated skin contact. Wash skin with soap and
   water after handling. Wash contaminated clothing before re-use.
   STORAGE REQUIREMENTS / CONDITIONS TO AVOID:
   Keep containers closed (when not in use).
   Keep away from heat, sparks and flames.
   Store in a cool, dry, well ventilated area away from incompatible
   materials.
   Smoking in the area where this material is used should be
   strictly prohibited.
   DO NOT cut, drill, grind or weld near containers even when empty.
   Residual product or vapours may ignite or explode.
   INCOMPATIBLE MATERIALS:
   Oxidisers, Strong Acids or Alkalies.
?
MATERIAL SAFETY DATA SHEET 
EVERSLIK 1201 CLEAR
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
   VENTILATION AND ENGINEERING CONTROLS:
   General mechanical ventilation or local exhaust should be suitable to
   keep vapour concentrations below the threshold limit values.
   All ventilation equipment must be explosion proof.
   For personal entry into confined spaces (i.e. bulk storage tanks)
   a proper confined space entry procedure must be followed
   including ventilation and testing of tank atmosphere. Make-up air
   should always be supplied to balance air exhausted.
   Effective exhaust ventilation should always be provided to draw
   fumes, vapors or dust away from workers to prevent routine
   inhalation.
   RESPIRATORY PROTECTION:
   Use NIOSH/MSHA approved Cartridge Respirator or Mask to keep airborne
   mists and concentrations below the time weighted threshold limit
   values.
   SKIN PROTECTION AND GLOVES:
   Use Chemically impermeable gloves (eg Neoprene or Nitrile) for skin
   protection.
   EYE PROTECTION:
   Use chemical Safety Glasses/Goggles and Faceshields. Contact lenses
   should not be worn without goggles.
   OTHER PROTECTIVE EQUIPMENT:
   Eye wash stations and safety showers in the workplace are recommended.
   PERMISSIBLE EXPOSURE LEVELS:
   PLEASE SEE SECTION 2, HAZARDOUS MATERIALS.
9. PHYSICAL AND CHEMICAL PROPERTIES
   SPECIFIC GRAVITY .................: .99679
   POUNDS PER GALLON ................: 8.3 lb/gl
   VOLATILE (% BY VOLUME) ...........: Not available
   VOLATILE (% BY WEIGHT) ...........: 55%
   BOILING POINT (DEGREES F.) .......: 200F to 250F
   VOC (EPA Method 24)...............: 580 grams/liter
   MELTING POINT.....................: Not Established.
   EVAPORATION RATE (BUTYL ACETATE=1): Faster than n-Butyl Acetate.
   VAPOR PRESSURE (MM HG AT 20°F.)...: Not Available.
   VAPOR DENSITY (AIR=1).............: Heavier than air.
   SOLUBILITY IN WATER ..............: Insoluble
   PH ...............................: Not Applicable.
   APPEARANCE AND ODOR ..............: Clear liquid, organic solvent odor
10. STABILITY AND REACTIVITY
    STABILITY AND REACTIVITY:
    Stable under normal conditions.
    CONDITIONS TO AVOID:
    Heat, sparks, open flames or other sources of ignition.
    MATERIALS TO AVOID:
?
MATERIAL SAFETY DATA SHEET 
EVERSLIK 1201 CLEAR
    Oxidizers, Strong Acids or Alkalies.
    HAZARDOUS POLYMERIZATION:
    Will not occur.
11. TOXICOLOGICAL INFORMATION
    LD50 / LC50:
    Please see Section 2, Hazardous Ingredients.
    CARCINOGENICITY:
    NTP-Yes
    IARC-Yes
    MUTAGENICITY:
    None known.
    SENSITIZATION TO MATERIAL:
    None Known
    CONDITIONS AGGRAVATED BY EXPOSURE:
    May aggrevate pre-existing skin or respiratory disorders (bronchitis,
    emphysema, hyper-reactivity) skin allergies, eczema.
    SYNERGYSTIC MATERIALS:
    None known
12. ECOLOGICAL INFORMATION
    ENVIRONMENTAL EFFECTS:
    Do not allow product or runoff from fire control to enter storm or
    sanitary *ers, lakes, rivers, streams, or public waterways.
    Canadian and U.S. regulations require that environmental and/or
    other agencies be notified of a spill incident. The spill area
    must be cleaned and restored to the original condition or to the
    satisfaction of authorities.
    AQUATIC TOXICITY:
    Not known to be a marine pollutant
13. WASTE DISPOSAL
    WASTE MANAGEMENT:
    Waste management priorities (depending on volumes and concentration of
    waste) are: 1. Recycle (reprocess), 2. Energy recovery (cement
    killns, thermal power generation), 3. Incineration, 4. Disposal
    at a licensed waste disposal facility. Do not attempt to combust
    waste on-site. Incinerate at a licensed waste disposal site with
    approval of environment authority
14. TRANSPORT INFORMATION
    TDG: PAINT RELATED MATERIAL
    CLASS 3, UN1263, PACKING GROUP II
15. REGULATORY INFORMATION
    WHMIS CLASSIFICATION:
    B2, D2A, D2B,
?
MATERIAL SAFETY DATA SHEET 
EVERSLIK 1201 CLEAR
    CANADIAN WHMIS:
    THIS PRODUCT HAS BEEN  CLASSIFIED IN ACCORDANCE WITH THE  HAZARD
    CRITERIA OF THE CONTROLLED PRODUCTS REGULATIONS (CPR),  AND  THIS
    MSDS CONTAINS ALL THE INFORMATION REQUIRED BY THE CPR.
    OSHA REGULATED: YES
    SARA:
    IF THIS MATERIAL HAS ANY COMPONENTS WHICH ARE REPORTABLE UNDER SARA 313
    THEY ARE SHOWN IN THE FOLLOWING LISTING. IF THE LISTING IS BLANK, THEN
    THERE ARE NO REPORTABLE COMPONENTS.
    COMPONENTS REPORTABLE UNDER SARA 313: CAS#            % BY WT.
    ----------------------------------------------------------------------------
    METHYL ISOBUTYL KETONE                   108-10-1     10% - 15%
    TOLUENE                                  108-88-3     10% - 15%
    XYLENE                                   1330-20-7    10% - 15%
    ETHANOL                                  64-17-5      5% - 10%
    N-BUTANOL                                71-36-3      0% - 5%
    PHOSPHORIC ACID                          7664-38-2    0% - 5%
    METHYL ALCOHOL                           67-56-1      0% - 5%
    ALL COMPONENTS OF THIS PRODUCT ARE ON THE TSCA INVENTORY OR ARE EXCEMPT
    FROM TSCA INVENTORY REQUIREMENTS
16. OTHER INFORMATION
    TO THE BEST OF OUR KNOWLEDGE,  THE INFORMATION AND RECOMMENDATIONS
    CONTAINED HEREIN IS BELIEVED TO BE ACCURATE  AT THE  TIME  OF
    PREPARATION OR OBTAINED  FROM  SOURCES BELIEVED TO BE RELIABLE.
    HOWEVER IT IS THE USER'S RESPONSIBILITY  TO  DETERMINE  SAFETY, TOXICITY
    AND SUITABILITY FOR HIS OWN USE OF THE PRODUCT.  EVERLUBE PRODUCTS
    ASSUMES NO RESPONSIBILITY. THE CUSTOMER OR RECIPIENT OF THIS MSDS
    SHOULD ENSURE THAT THE INFORMATION CONTAINED IN THIS MSDS IS MADE
    AVAILABLE TO ALL EMPLOYEES OR OTHER PERSONS WHOME HE  KNOWS OR
    BELIEVES WILL USE THIS MATERIAL.